Decorative supports, aprons, and corbels are great extra features to add to cabinets. They are not standard on most cabinets, but are a great project to add on to the kitchen after installation of the new cabinet. Decorative supports put an artful emphasis on upper cabinets. The supports were originally designed to help support cabinets, but now they only serve as decor.
9. If your cabinets end up butting against another wall, you may need a filler strip to make up the last few inches. If you have custom cabinets, they should have been built to fill this gap, but if you are using stock or RTA Kitchen Cabinets the filler strip may be needed. If you do need to use a filler strip, leave the last cabinet detached from the other cabinets. Clamp a straightedge to the face of the nearest installed unit, extending far enough for you to put alignment marks on the end wall. Allow a 3/4" offset behind those marks (for the thickness of the filler piece) and fasten a cleat to the wall. Then install and fasten the last cabinet and measure the gap between its face frame and the wall.
In the event that you think this is a project that you are comfortable tackling, you can either use a kitchen designer or go to one of the home improvement centers and take advantage of their free design services.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does collegeresearch.us claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.